Pilot-RC 75in (1.9m) Wingspan Extra 330SX
Buy on Hobbyplastic.co.uk
Find Your Local MacGregor Stockist
Click On Images to Enlarge
Overview
Introducing a new era of 30-40cc size airframes - the Extra-330SX 75in (1.9m)
New Features
- Removeable stabiliser with new 'Quick Release' system.
- Fuel tank spot on the CG top of wing tube same as 120cc size to avoid CG change during flight.
- Elevator designed for medium size servo.
- New size airframe provides excellent 3D performance when using popular engines such as DLE35RA, DA35, GP38.
Specifications
| Model: | Extra 330SX |
|---|---|
| Wingspan: | 75in (1.9m) |
| Length: | 74.6in (1.89m) including spinner |
| Wing Area: | 1,115sq in (7,194sq cm) |
| Weight: | 5.6kg (12.3lbs) |
Features:
- NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
- NEW! Patented quick assembly system for wings, stabiliser and SFG
- NEW! Patented quick assembly system for canopy.
- Film covering applied over a Genuine German Oracover (Ultracote) base
- Highly prefabricated, experienced builders can have air ready in under a day
- Pre-installed hinges (glued and pinned)
- Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
- Removable wings and NEW quick release for stabs no tools require
- Laser engraved motor mounting position
- Easy canister installation due to open construction
- Pull push and Pull pull system for Rudder servo
Included Hardware:
- Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
- "Spare" lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
- Pre-installed hinges and pre-mounted canopy
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Wheels, axles and wheel pants
- Pre-prepared pushrods with ball links
- Matching 3.5in carbon spinner
"Spare" transparent cowl for easy markings
Crash Kits Available For This Model:
- Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
- Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model
- Please note that additional or alternative spare wood outside of the above Packs is not available to order.
Images for illustration purposes only - exact contents vary per package, model and size.
Required Hardware:
Motor: 30-40cc or equivalent electric
Servos: 5 high torque plus throttle // Uses x1 per aileron, x1 per elevator half and x1 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
Recommended Hardware:
Aileron and Rudder Servos: MacGregor MGB6928HV2 28Kg/0.05s Brushless High Voltage Servo
Elevator Servo: MacGregor MGB5216HV 16.0kg/0.08s Brushless High Voltage Servo
Throttle Servo: MacGregor MG5921HV 20.3Kg.cm/0.12s High Voltage Servo
Servo arms: Pilot-RC 1.6in Aluminium arms - included with Pilot-RC Servos (PIL302)
Engine: DLE35RA 2-Stroke
Wingbags: Pilot-RC Wing Bag for 35cc Aerobatic Plane (PIL068)
Video:
Gallery:
Build information
Cowl Size
A: -mm | B: -mm | C: -mm | D: -mm
Exhaust Tunnel Size
A: -mm | B: -m | C: -mm | D: -mm | E: -mm | F: -mm
Rudder Horns and Pull Pull Location
A: N/A | B: N/A | C: N/A | D: 5mm | E: 8.5mm
Servo Extension Lengths
- Each aileron: 15cm (to reach receiver direct)
- Each elevator: 65cm
- Rudder: pull pull no extension required
Centre of Gravity
128mm - Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Centre of Gravity.
Order Code: PIL836/837/838
Manufactured By Pilot-RC
Manuals/Downloads