Secraft V2 19mm (M2) Servo Arm
Click On Images to Enlarge
Material: aluminium 6061-T6 (anodised)
JR:23T(Gold), Hitec:24T(Blue), Futaba:25T(Red)
Fixing screw bolt is M2
1 Per package
M2 Bolt is not included
- Follow aircraft manufactures recommendation for Servo control horn set up.
- Loctite all servo screws.
- Install ball link on bottom of servo arm (where possible).
- Keep all linkage tight.
- Servo arms longer than what is recommended can cause.
The Hitec 8XXX series servos must use Futaba type.