Secraft V1 1.25 Inch (M3) Servo Arm (Hitec)
Click On Images to Enlarge
Material: aluminium 6061-T6 (anodised)
Compatible with Hitec Servos: 24T(blue)
Fixing screw bolt is M3 or #4-40
1 Per package
Bolt is not included
- Follow aircraft manufactures recommendation for Servo control horn set up.
- Loctite all servo screws.
- Install ball link on bottom of servo arm (where possible).
- Keep all linkage tight.
- Servo arms longer than what is recommended can cause.