Secraft Drilling Jig Set 4S (Drill: 5.1mm)
Click On Images to Enlarge
Drilling Jig Set 4S (Drill: 5.1mm) - Engine: DA50, DL50, DL55, EVO 54
Mounting: 4 Hole
Hole Diameter: 30mm
Drill: 5.1mm Included
Jig(Gold): AL6061 (Anodised)
Rotation prevention Pin(Red): AL6061 (Anodised)
Drill Holders(Silver): SKD11 (heat treatment)
Prop drill jig for 4 bolt fixing comes with drill guide locking peg and drill bit.Hand held drill can be used as drill guide keeps drill straight no need for a pillar drill.
Step 1: Insert jig into the hole to the propeller.
Step 2: After inserting jig, drill the first hole using the silver drill guide.
Step 3: Place rotation prevention pin (red) into the drilled hole.
Step 4: Drill the remainder of the holes using the drill guide.