Secraft V1 Futaba 1.5 Inch (M3) Servo Arm (Red)

  Click On Images to Enlarge

Overview

Material: aluminium 6061-T6 (anodised)

Compatible with Futaba Servos:25T(Red)

Length: 1.5inch(38mm)

Fixing screw bolt is M3

Weight: 2.3g

1 Per package

Bolt is not included

Installation Guide

• Follow aircraft manufactures recommendation for Servo control horn set up.
• Loctite all servo screws.
• Install ball link on bottom of servo arm (where possible).
• Keep all linkage tight.
• Servo arms longer than what is recommended can cause.