Pilot-RC 103in Wingspan Raven

  Click On Images to Enlarge

Overview

The Ultimate 120cc Hybrid Evolution

The Pilot-RC 103in Raven is the culmination of a intensive design journey that began in early 2025. Our mission was clear; synthesize the world-class features of our most successful platforms into a single, dominant 120cc airframe. By blending the cutting-edge, lightweight wing technology of the Extra 330SX with the legendary tail authority and side profile of the Extra NG V2, we have created a "super-hybrid" that defines the modern aerobatic experience.

Extensively flight-tested through three generations of prototypes, the Raven has been refined to hit the perfect "sweet spot". It delivers the aggressive 3D agility you demand with the rock-solid tracking and precision required for high-level sequences.

Whether you are pushing the envelope in low-and-slow high-alpha flight or screaming through a precision line, the Raven 103in provides a connected, intuitive feel that inspires total confidence. This isn't just another airplane; it's the new benchmark for Pilot-RC performance.

Specifications:

Model:	RAVEN
Wingspan:	103.3in (2.624m)
Length:	101in (2.58m) with 5in spinner
Wing area:	1,843sq in (11,890sq cm)
Weight:	27.72lbs (12.6kg)

Features:

• NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
• NEW! Patented quick assembly system for wings, stabiliser no tools require
• NEW! Patented quick assembly system for canopy.
• NEW! Pre-installed blind nut on tip wing for night flight light system
• NEW! Counter balance on tip aileron for allow servo outboard move closer to inboard servo for lighter tip wing and crisp snap roll
• NEW! Fibreglass canopy frame.
• NEW! Spinner painted special colour scheme (Optional extra - sold separately)
• Film covering applied over a Genuine German Oracover (Ultracote) base
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed hinges (glued and pinned)
• Internally mounted cowling – so no visible external screw expose
• Removable wings and stabs
• Laser engraved motor mounting position
• Easy canister installation due to open construction
• Pull push system for Rudder servo

Cowl And Wheel Pants With Scale Detailing

Included Hardware:

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• "Spare" lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-prepared pushrods with ball links
• Matching plain colour 5in carbon spinner
• Baffles cooling for intake cowl to cylinder

"Spare" transparent cowl for easy markings

Crash Kits Available For This Model:

• Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
• Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model.
• Please note that additional or alternative spare wood outside of the above Packs is not available to order.

Images for illustration purposes only – exact contents vary per package, model and size.

Required Hardware:

Motor: 80-120cc or equivalent electric

Servos: 7 high torque plus throttle // Uses x2 per aileron, x1 per elevator half and x1 or x2 on rudder using push-pull

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Recommended Hardware (Not Supplied):

Servos: MacGregor MGB8346HV 38Kg.cm/0.10s Servo or MacGregor MGB8555HV 54.7Kg.cm/0.12s Servo or Pilot-RC PW48AH 48kg.cm/0.10s Servo

Servo arms: Pilot-RC 1.6in Aluminium arms (included with Pilot-RC servos) - PIL302

Wingbags: Pilot-RC Wingbags - PIL064

Suncover: Acrobatic suncover

Video:

Pilot-RC RAVEN 103in

Pilot-RC RAVEN 103in

Gallery:

Build information

Cowl Size:

A: 342mm, B: 326mm, C: 319mm, D: 322mm

Exhaust Tunnel Size:

A: 974mm, B: 112mm, C: 974mm, D: 118mm, E: 172mm, F: 184mm

Rudder Horns And Pull Pull Location:

A: N/A, B: N/A, C: N/A, D: 86mm, E: 8.5mm

Extension Wire Lengths:

Throttle: 25cm

Each wing: Inside aileron 30cm | Outside aileron 80cm (to reach receiver direct)

Each elevator: 136cm

Each rudder servo: 136cm

Centre Of Gravity:

215mm - Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Centre of Gravity.

Manuals/Downloads

• Online Manual – 120cc build guide (Pilot-RC Website)