Pilot-RC Slick 74in (1.88m) Wingspan

  Click On Images to Enlarge

Overview

Pilot RC already surprised everyone with a new level of precision and agility with our extremely popular Laser. We have now taken all these great features and grown them into our new Slick.

The Pilot RC Slick, as well as looking great and offering color schemes designed by legendary Italian designer Mirco Pecorari at Aircraft Studio Design, it once again flys as good as it looks, and that is really saying something!

All the crazy agility and manoeuvrability of the Laser, while keeping the friendly flying characteristics of Pilot RC planes, the new Slick offers an even further improvement in precision and aero musical performance, feeling like a larger plane, a larger plane that can go nuts!

Specifications

Model:	Slick – 74in
Wingspan:	74in (1.88m)
Length:	70.6in (1.79m)
Wing area:	1,081sq in (6,978sq cm)
Weight:	11.4lbs (5.2kg)

Features

• NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
• NEW! Patented quick assembly system for wings and SFG.
• NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
• Film covering applied over a Genuine German Oracover (Ultracote) base
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed aileron and elevator hinges (glued and pinned)
• Easy canister installation due to open construction
• Removable wings
• One piece stabilizer
• Laser engraved motor mounting position
• Pull-Pull system for Rudder servo
• Cowl fits both gasoline and electric motors

Included Hardware

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-prepared pushrods with ball links
• Matching carbon spinner

Required Hardware

Motor: 30-40cc or equivalent electric

Servos: 4 high torque plus throttle // Uses x2 per aileron, x1 for elevator and x1 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Recommended Hardware:

• Servos: MacGregor MG5921HV 20.3Kg.cm/0.12s High Voltage Servo
• Servo arms: Pilot-RC 1.6in Aluminium arms (PIL302)
• Electric Motor & ESC: Dualsky GA3500R Racing Edition X-Motor or Dualsky GA4000.7 V2 X-Motor
• Engine: DLE-35RA Two-Stroke Petrol Engine or DLE-40 Twin Two-Stroke Petrol Engine
• Wingbags: Pilot-RC Wing Bag for 35cc Aerobatic Plane

Colour Scheme Covering References:

Slick (Blue/Green - 02)

• PIL012-6 - Pilot-RC Green Covering (2m x 640mm)
• ACC0185 - MacGregor RC Sky Blue Covering Film (638mm x 2m)
• ACC0201 - MacGregor RC Indigo Covering Film (638mm x 2m)

Video

Pilot-RC Slick, if you liked our Laser you are going to love the Slick!!

Gallery

Build Information

Cowl Size

A: 252mm – B: 238mm – C: 245mm – D: 255mm

Exhaust Tunnel Size

A: 253mm – B: 83mm – C: 253mm – D: 87mm – E: 129mm

Rudder Horns and Pull Pull Location

A: 80mm - B: 112mm - C & D: 16mm (same horn for pull pull or push pull)

Servo Extension Lengths

• Throttle: No extension required
• Each aileron: 15cm (to reach receiver direct)
• Elevator: 67cm
• Rudder: Pull Pull, no required extension)

Centre of Gravity

136mm - Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

Manuals/Downloads

• Info coming soon...