Pilot-RC 78in Dolphin Jet
- Balsa wood and Oracover (Ultracote) covering construction
- Aluminum tube plug-in for wings spar.
- Two pieces wing.
- Aluminum tube for stabiliser.
- Removable stabilizer.
- Factory pre-installed hinges
- Super light and strong
- Single Servo Setup: One Servo for each flap, each aileron, each elevator, for rudder, for front wheel
- Dual wall tail pipe for 8-14kg turbine
- Strong pneumatic retract landing gear with air brake, air tube, brake valve, retract valve and all air kits accessories.
- Removable SFG included
- Standard wing is design for jet beginner, easy to fly and land
- Option for Navigation LED lights with programmer and Wiring
Please note: Instruction manuals are not supplied with Pilot-RC Kits. Generic manuals are downloadable from macgregor.co.uk or pilot-rc.com
Control horns mentioned within manuals are no longer supplied with Pilot-RC ARF Kits.
- Take off: flaps set at 21 degree down, the elevator set to be 2 degree up.
- Landing: flaps set at 39 degree down, the elevator set to be 5 degree up.
Pilot-RC's Dolphin Jet requires the least amount of assembly of any ARF kit to obtain the maximum performance.
Both the design and manufacturing have been undertaken to the highest standards, using best quality hardware, covering, wood & glue during factory construction stage.
By optimal weight and balance along with reliable construction, you will find this plane ideal for 3D - Freestyle and aerobatic flying.
At Pilot they make every effort to provide the highest quality products and customer service. Their goal is a happy customer having a wonderful time assembling and flying Pilot model aircraft.
|Wingspan:||Standard Wing - 86in (2.2M) | Sport Wing - 78in (2M)|
|Wing Area:||1274 sq in (8220sq cm) for trainer wing|
|Fuselage length:||86in (2.1M)|
|Weight:||24 lbs (10.88kg)|
|Engine Required:||8-14kg turbine|
Schemes List and Replacement Covering Numbers
|Our Order Code||Colour Scheme No||Scheme Name||Oracover Covering No||Ultracote Covering No|
New Airbrush Colour Schemes
Pilot-RC have just introduced some new Airbrush Colour Schemes for the Dolphin-78 jet with Landing Gear.
PIL250 - Dolphin-78 Jet with Landing Gear (Green/Blue Airbrush)
PIL249 - Dolphin-78 Jet with Landing Gear (Red/Blue Airbrush)
Option wing special design for sport flying. more sharp airfoil and more fast speed. you can use the same fuselage with two kind of wing.
Pilot-RC offer TR (turbine ready) version : airframe with tail pipe, pneumatic retract landing gear with brake, 8pcs Pilot-RC PY-20AL servos, 2pcs FUTABA 3003 servos (for retract and brake valves), servo extension wire. preinstall the above items in factory.
Pilot RC is brings Customer Service to a new level!
Free wood part replacements to repair your plane.
Damaged your Pilot-RC plane? Don't worry about it. Send the damaged plane photos to Tony at firstname.lastname@example.org and he will send you the pre-cut wood so you can repair it. The pre-cut wood is FREE. You only need to pay the shipping cost. if you want the pre-cut Ultracote covering, Pilot-RC will sell it to you at cost. All replacements are sent directly from the factory in China and shipping costs will be calculated prior to shipment. Offer applies to Pilot-RC airplanes only. Pilot-RC does not have the designs and drawing for other manufacturers parts.
Note: Due to constant design improvements Pilot RC reserves the right to change and modify design specifications without notice. Pilot's goal is to provide you with the highest performing airframes in the world using the latest technology, building techniques and materials.