Electrospeed XBus (Input) to DJI/S.Bus (Output) Signal Converter Module

  Click On Images to Enlarge

Overview

XBus (Input) to DJI/S.Bus (Output) Signal Converter Module.

This module enables you to use your JR Propo DMSS XBus radio with DJI and other Futaba S.Bus compatible products.

You can use any XBus compatible receiver. Connect the receiver to the converter module using a male to male patch lead. Ensure that the polarity is correct, ground, brown or black wire, should be at the bottom of the converter board. A second male to male patch lead will be required to connect the converter module to the SBus input of the device.

Dimensions: 41 x 9.5 x 6.5mm (L x W X H)

Manuals/Downloads

• XBus to DJI/S.Bus Converter Module Instruction Manual