© Copyright MacGregor Industries
Errors and Omissions
Contact Us
Modeller Support Centre
Home > Modeller Support Centre > Frequently Asked Questions > General
products-button.jpg
service-button-dp.jpg
about-macgregor.jpg
links-button.jpg
macgregor-logo.jpg
Frequently Asked Questions
Service Notices
Manuals & Exploded Diagrams
Contact Us
Errors and Omissions
Guide to Fitting the JR Neckstrap Balance Point Adapter
1. This Balancer comes in 3 parts as
can be seen in the graphic below.
FAQ_step1.jpg
2. Fit the washer into the neckstrap holder on the radio.
FAQ_step2.jpg
FAQ_step3.jpg
3. Fit the balancer over the holder
FAQ_step4.jpg
4. Insert Screw from top end
FAQ_step5.jpg
5. Tighten up
FAQ_step6.jpg
6. Fit Neckstrap to Balancer. (Balancer has 3 positions to choose from.)
FAQ_step7.jpg