PCM10x
JR’s
flagship radio is available in dedicated helicopter
or aeroplane configurations. This enables the PCM10X
transmitter to be specifically tailored to the type
of flying required rather than having to make compromises
on switch positions etc. as is normally necessary
with multi-function types.
PCM10X
is the transmitter of choice for expert pilots,
particularly those engaged in competition or display
flying.
Each
transmitter is supplied in a stylish aluminium carry
case with a pre-cut foam insert to ensure maximum
protection during transit and storage.
The PCM10X is supplied as a combo, with the Tx pre-set
to Mode 1 or Mode 2, complete with an ultra high
performance R1000DS PCM Dual Conversion receiver.
This receiver features super narrow band ABC&W
circuitry, including an ‘S’ type 1024 Central Processing
Unit, to offer an unparalleled RF link to your model.
Also
included are a heavy duty charger, an 1100 mAh Tx
battery, a 1400 mAh Rx battery, a JR neck strap,
a heavy duty switch harness, a DSC lead, a servo
extension lead and a DSC/charge connection kit.
Helicopter
Functions
- The following pre-selected mixes are adjustable
& can be activated in any or all flight modes:
Rudder - Throttle, Aileron - Throttle, Elevator
- Throttle.
- Gyro gain function allows stick priority gain
control.
- 5 programmable tail curves, with 7 points.
- Mix rate allows the curve to be expanded (1/1,
1/2, 1/4, 1/10) for more accurate tail adjustment.
- Swashplate mixing with independent aileron-elevator
& elevator-aileron values in all flight modes.
- 1200 & 1400 three servo CCPM mixing is
also available.
- Exponential curve function for smoother throttle
& pitch curves.
- When used with a JR remote gain gyro, three
gyro rates are available.
- Graphical multi-point pitch & throttle
curve means you can set the pitch for seven selectable
stick positions.
- Eight free programmable mixes, four of which
allow programming of up to a seven point curve
that can be turned on/off in any flight mode.
Aeroplane
Functions
- Dual trim options in Flight Modes. One allows
each flight mode to have their own separate digital
trim settings adjustable via the trim switches.
The other retains the same trim values for all
flight modes, adjustable in any flight mode.
- Two, 8 point programmable throttle curves,
selectable by nominated switches.
- Alarm sounds if the Tx is turned on & the
flight mode switch is not at zero
- Dual & expo rates are independently adjustable
in each direction.
- Channels 5-10 can be inhibited for use as slave
channels during mixing
- Dual elevator feature for aircraft with one
or more servos driving each elevator half.
- 5 different rates can be programmed for aileron,
elevator & rudder.
- 5 response curves (e.g. expo, VTR) can be programmed
for aileron, elevator & rudder.
- Servo speed is independently selectable in
each flight mode.
- Snap roll rate & direction can be selected
for each flight mode.
- Gyro sensor adjustment allows easy gain adjustment
of any JR remote gain gyro.
- 3 gain rates are available & stick priority
mixing can be selected, with adjustments possible
to the centre and end point gains.
- 8 programmable mixes available (3 are multi-point),
each with 2 mix values.
- Aileron - rudder, rudder - aileron & rudder
- elevator mixes have 2 mix values, selected automatically
in the flight modes or by a nominated switch.
- 3 flap positions can be pre-set with elevator
compensation settings.
|
dedicated
aeroplane or helicopter types
10
channels, 10 model memories

Shared
Functions
- 5 Flight Modes available via programmable switches.
Almost every parameter can be adjusted to suit
different flight regimes (e.g. Heli - FAI aerobatics,
3D, Hovering. Aero - Landing, Aerobatics, 3D/Fun-fly,
Prop Hanging.)
- Digital trims on aileron, elevator and rudder
with Adjustable Trim Rates.
- Variable pitch tone during digital trim adjustments
gives an audible indication of trim position
- Digital trims positions are displayed as bar
graphs or digital values.
- Digital trim positions are automatically stored
& recalled when switching models.
- Throttle trim is mechanical to give a visual
reference during engine start. Trim rate is adjustable.
- The removeable 1100mAh battery pack gives nearly
5 hrs of continuous use. Can be recharged away
from the transmitter.
- Buddy box link allows another JR transmitter
to be connected for training.
- Servo monitor displays the ten servo positions.
Especially useful when setting up mixing.
- The large touch-screen LCD display makes the
PCM10X convenient & easy to set-up.
- Personalise the feel of the controls using
Adjustable Stick Tension for more precise flying.
- Compatible with most JR FM receivers, past
& present - PPM, S-PCM (1024) and the much
used Z-PCM (512) types.
- 5 year lithium battery prevents memory loss
if the main battery pack is discharged or removed
from the transmitter.
- Fail-safe in PCM mode allows individual selection
of hold or pre-set positions for the first eight
channels.
- Direct Servo Control permits operation of all
servos without generating a radio signal.
- Choice of Dual Rate, Exponential or Variable
Trace Rate movement for aileron, elevator &
rudder channels.
|