PowerBox iGyro™ SRS

PowerBox iGyro™ SRS
PowerBox iGyro™ SRS
PowerBox iGyro™ SRS
PowerBox iGyro™ SRS
PowerBox iGyro™ SRS

enlarge-icon  Click On Images to Enlarge

Overview

Features

  • Extremely accurate triple-axis MEMS sensor
  • Special regulatory algorithm designed for fixed-wing model aircraft
  • Menu-based setup assistant
  • Three-stage flight phase switching
  • Three axes distributed to five servos, each adjustable independently
  • GPS-regulated gyro gain
  • Integral delta mixer
  • Can be installed in any attitude
  • Graphic OLED screen with 128 x 64 pixels
  • Ultra-simple menu-controlled programming method using the SensorSwitch
  • SRS technology for use with various bus systems:
    Futaba S-Bus, Spektrum SRXL, DSM2/DSMX, JR DMSS, HoTT, M-Link and Jeti
  • Unrestricted channel assignment (channel mapping)
  • Digital output can be passed on to an SRS PowerBox system
  • 16-bit processor for fast, high-resolution signal processing
  • Settings can be stored on a PC and reloaded at any time
  • Updateable with PowerBox Systems USB Interface connectors
  • Robust aluminium case

Technical Data

Operating voltage4.0V - 9.0V
Current drain Power-on state51mA
Current drain, GPS60mA
Maximum load current10A
Signal inputserial
Supported RC systemsFutaba, Spektrum, JR, Jeti, Graupner, Multiplex
Receiver redundancySRS
Servo sockets5
Servo signal resolution0,5µs
Gyro regulationHeading- and Normalmode
Gyro sensor typeMEMS
Number of sensor axes3
ScreenOLED 128 x 64 pixels, graphic
Dimensions52 x 35 x 14 mm
Weight50g, incl. GPS Sensor
Temperature range-30°C to +75°C

Overview

The PowerBox iGyro™ SRS is a completely new type of gyro system intended for fixed-wing model aircraft. At the development stage our constant aim was to com-bine maximum versatility with simplicity of operation. The system incorporates a regulatory algorithm specifically developed for fixed-wing models, which causes hardly any alteration in the model's familiar flying characteristics; at the same time the aeroplane flies much more smoothly and accurately, and is less sensitive to unwanted weather-induced or aerodynamic influences. The need for mixers, such as elevator to rudder or flaps, is eliminated entirely. The iGyro™ exploits the latest servo bus technology to minimise the extremely complex wiring arrangements necessitated by previous gyro systems.

The ability to assign any channel to the gain adjusters makes it possible to set up the desired gyro effect accurately in just one short flight. Independent adjustment of each of the five outputs is possible, enabling the modeller to set up gyro gain and direction of effect precisely. The separate GPS sensor provides a means of obtaining a constant gyro effect over the model's full speed range, effectively eliminating the problem of over-compensation leading to oscillation in high-speed flight. In version 16 and later the software include a menu-based setup assistant which makes it possible to complete all the settings in just a few minutes.

PB3500 - PowerBox iGyro™ SRS with Sensor Switch without GPS & USB Adapter

PB3510 - PowerBox iGyro™ SRS with GPS, Sensor Switch & USB Adapter

PB3530 - PowerBox iGyro™ SRS with GPS without Sensor Switch & USB Adapter

Related Products

USB Interface Adapter

USB Interface Adapter

PB9020

View Product

Bluecom Adapter

Bluecom™ Adapter

PB9021

View Product

GPS II

GPS II

PB3520

View Product

SensorSwitch (Black Connector)

SensorSwitch (Black Connector)

PB3550

View Product

PowerBox logo

Order Code: PB3500/3510/3530
Manufactured By
PowerBox-Systems