JR Propo DS389HV Digital Servo (Metal Gears)

JR Propo DS389HV Digital Servo (Metal Gears)

enlarge-icon  Click On Images to Enlarge

Overview

Product Features:

  • Ideal for Miniature Electric Powered Aircraft.
  • JR's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe rx pack.
  • High Speed Type.
  • Features a Metal Gearset.
  • Servo weighs just 12g.
  • Servo Type: Digital High Voltage 6.0-8.5V).

12g Sub Micro Servo (High Speed Type) for Optimal Use in Miniature EP Aircraft.

Battery chemistries such as Li-Po, Li-Ion, and Li-Fe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue is the output voltage of these batteries is higher then the previous standard 4 - and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.

To get around this issue modelers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.

JR's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack (6.6V to 7.4V nominal voltage). This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (7.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.

Specifications:

Torque:0.8Kg.cm (6.0v) / 1.0Kg.cm (7.4v)
Speed:0.10s/60° (6.0v) / 0.08s/60° (7.4v)
Weight:12g
Dimensions:21.5 x 11.5 x 21.5mm
Operation Voltage:6.0V - 8.5V

JR Servos and 4.8v

JR design their range of servos around the voltage of a 4 cell Ni-Cd or Ni-Mh battery. These batteries are rated at 4.8v but this is a nominal voltage for the battery pack. A 4 cell battery will reach slightly over 6v when fully charged.

With modern Li-Po and Li-Fe batteries being widely used, regulated power supplies are becoming common place in model aircraft to help keep the weight down, keep a stable voltage and to aid in high power situations on large aircraft with high power servos. The use of a regulated power supply upto 6v is fine to use.

However using a 5 cell Ni-Mh battery which is rated at 6v is not ok to use, this battery will reach over 7v when fully charged and may damage the servo. If you are looking to use this type of battery we would recommend the HV, WV or NX range of JR servos which can handle this extra voltage.

jr propo logo

Order Code: JRC389HV
Manufactured By JR Propo

pound-sign Click for Price & Availability

shop-icon Find Your Local Stockist