JR Propo DS8425 High Spec Servo with Metal Gears

enlarge-icon  Click On Images to Enlarge



  • An ideal choice for RC Cars.
  • Supplied with mounting hardware and additional servo output arms.
  • Features a metal gearset and coreless motor.
  • Dual Ball Bearing.
  • Servo Type: Digital FET 4.8-6.0V.

Fitted with metal gears and coreless motor the DS8425 is the ideal choice for Radio Control Cars. Supplied with mounting hardware and additional servo output arms. The DS8425 is dual ball raced and can be used at 6.0v.


Torque:11.0 Kg.cm (4.8V)/13.0 Kg.cm (6.0V)
Speed:0.19s/60° (4.8V)/0.15s/60° (6.0V)
Dimensions:34.5 x 19 x 39mm

JR Servos and 4.8v

JR design their range of servos around the voltage of a 4 cell Ni-Cd or Ni-Mh battery. These batteries are rated at 4.8v but this is a nominal voltage for the battery pack. A 4 cell battery will reach slightly over 6v when fully charged.

With modern Li-Po and Li-Fe batteries being widely used, regulated power supplies are becoming common place in model aircraft to help keep the weight down, keep a stable voltage and to aid in high power situations on large aircraft with high power servos. The use of a regulated power supply upto 6v is fine to use.

However using a 5 cell Ni-Mh battery which is rated at 6v is not ok to use, this battery will reach over 7v when fully charged and may damage the servo. If you are looking to use this type of battery we would recommend the HV, WV or NX range of JR servos which can handle this extra voltage.

jr propo logo

Order Code: JRC8425
Manufactured By JR Propo