Overview
Product Features:
• Special fibre glass main frame.
• Metal main rotor head / swashplate.
• Metal tail pulley / tail rotor grip.
• Direct tail belt drive .
Product Description
Following on from the standard Super Voyager E - 3 Cell helicopter, JR Heli Division have just released an upgraded four cell version. The extra cell combined with a more powerful NHM-30-10BL motor and a lower main gear ratio of 4.72:1 gives a big increase in head speed for 3D aerobatics.
Amongst the more visible upgrades are an all metal rotor head with thrust raced blade grips. Dampening is courtesy of O rings (using the hard option for 3D). The seesaw and washout arms are metal, with ball races, and the washout base is aluminium. A metal fly-bar arm assembly replaces the plastic item use in the SV3 kit.
At the tail there is a ball-raced metal case, a double-sided pitch slider and ball-raced metal tail rotor grips. The high quality feel is maintained using black G10 style tail fins and carbon boom supports with metal ends.
Other upgrades include a metal front pulley and a high-grade metal swash-plate. All linkage balls in this kit are of the screw in metal type. As with the SV3, the Super Voyager E 4-Cell is available as an assembly kit only (JRH98024), or as a kit including a NHM-30-10BL motor and a NHA-70-SB speed controller (JRH98025).
Specifications:
Overal Length: 855mm
Overall Height: 298mm
Overall Width: 157mm
Gross Weight: 1,800g
Main Rotor Diameter: 967mm
Tail Rotor Diameter: 185mm
Gear Ratio: 4.72:1:4.5
Suitable Main Blades: 11mm Grip Thickness / Bolt hole 3mm / Length 430-440mm
Battery Options (4 Cell)
4 Cell Li-Po Battery 14.8v 3300mAh (Dischargable 20C) Maximum Dimension: 155 x 45 x 30mm
