JR Propo Three Tail Blade Holder Set ø6mm
Having extra tail rotor will increase the rudder control speed as well as holding power.
- Tail center hub 6mm
- Tail PC plate
- Metal tail blade holder assembly
- Tail slide ring assembly
- Tail slide ring sleeve
- Blade bolt set, other screws
Forza 700, VIBE 90SG, VIBE SG E12, etc (helicopters with 6mm diameter tail outut shaft)
Note: When fitted to the Forza700, JRH62056 - Metal front bevel gear T22 assembly is required.
Tail rotor blade is not included in this set.
If your helicopter uses a torque tube tail drive, we recommend using JRH62085 - carbon tail rotor blade XB92-TR3 to reduce tail load.